Overclock Calculator: Clock Gain % and RAM Bandwidth

Free overclock and RAM bandwidth calculators with formulas, expectations and FAQs.

Use this free overclock calculator to see how large a clock increase really is, and the RAM speed calculator to turn a memory kit’s rating into theoretical bandwidth, true clock speed and latency. Both run in your browser and need no sign-up.

Overclock percentage calculator


RAM speed and bandwidth calculator

How the calculators work

The overclock percentage is simply the new clock minus the stock clock, divided by the stock clock. A move from 3,600 MHz to 4,000 MHz is an increase of about 11.1%.

For memory, the calculator uses three standard formulas:

  • Theoretical bandwidth (GB/s) = memory speed in MT/s × 8 bytes × number of channels ÷ 1,000.
  • Actual clock (MHz) = memory speed in MT/s ÷ 2, because DDR memory transfers data twice per clock. This is why DDR4-3200 runs at a true 1,600 MHz.
  • First-word latency (ns) = CAS latency × 2,000 ÷ memory speed in MT/s. Lower is better.

Bandwidth is a theoretical ceiling. Real programs reach less than that, and many games respond more to latency and to having dual-channel memory than to the headline number.

What to expect from overclocking

  • A higher clock does not mean the same percentage more FPS. Games are often limited by the slowest part in the system, so a CPU overclock helps most when the CPU is the limit and a GPU overclock helps most when the GPU is the limit. Check which one with the PC bottleneck calculator first.
  • Gains depend on the chip. Two processors of the same model can overclock differently, so there is no guaranteed result.
  • Heat and power limit what is possible. If temperatures climb, the chip can throttle and lose the gain. See the throttle calculator for how that works.
  • Overclocking can reduce stability and may affect your warranty. Raise clocks in small steps and test each change with a stress test before gaming.

Memory overclocking and XMP, DOCP and EXPO

Most memory kits run below their advertised speed until you enable an XMP, DOCP or EXPO profile in the BIOS. Turning that on is the simplest memory “overclock” and is worth doing before anything manual. For help choosing a speed, read our guide to the best RAM speed for gaming.

Overclock calculator FAQ

How do I calculate an overclock percentage?

Subtract the stock clock from the new clock, divide by the stock clock and multiply by 100. The calculator above does this for you.

Is DDR4-3200 really 3200 MHz?

No. The 3200 is the transfer rate in MT/s. The actual clock is half of that, 1,600 MHz. Marketing often writes MHz for both.

Does more RAM bandwidth mean more FPS?

Not always. Bandwidth helps in memory-heavy workloads and on integrated graphics, but many games gain little from faster memory once it is in dual channel at a reasonable speed.

Is overclocking safe?

It carries risk if you push voltage and temperature too far. Make small changes, monitor temperatures and stability, and stop if the system becomes unstable.